… deposited drops from a solution of polystyrene in toluene with Re = 110.8 and We = 2.75
onto a glass substrate, with a static contact angle of <5. They measured β* ≈ 4.49, compared …

… The data from the 50 spray angle sample system is that of the interlamellar pores, where
the pores are mostly parallel to the substrate. The other void system is that of (Fig. 9) and from …

… pL-droplet impact with porous substrates using predictions from … a droplet and a porous
substrate involves many events (eg, … the contact angle hysterisis using two contact angle values (…

… encoding the influence of porosity in an effective Navier slip boundary condition at the porous
substrate surface. It … The contact angle measurement of silicone oil on the porous alumina …

… larger than bulk contact angles of 35 ± 3 measured on a flat glass substrate using identical
test … angles can dramatically underestimate in situ contact angles even in the simplest porous …

… and the porous substrate (… the porous substrate is modeled as a spherical cap, and the
experimental data include the radii of the contact and wetted areas along with the contact angles …

… porous structures plays a critical role in their interfacial behaviors,36, 37 the contact angle
measurements … As shown in insets of Figure 2C,F,I, with the decrease of the pore dimensions …

… angle of incidence ellipsometry studies of porous Si layers prepared from p + -type (111)
Si substrates… Ψ as a function of the incidence angle Φ 0 was performed and the refraction …

… It seems that while overall the penetration is following a Lucas–Washburn type time
dependency, for our substrate we need a more complex pore model than the one in the Lucas–…

… The representative contact angle ϑ was then taken as the mean … for the next sequence of
contact angle measurements. … within the pores of the etched silicon substrate that determines …