… The ellipsometric angle ψ and phase difference Δ were measured as a function of … the
ellipsometry measurements, we set an optical model for a PAA film on a glass substrate as shown …

… Frank and Perré [22] conducted the investigations about drop spreading and capillary
absorption at the surface of a porous substrate. Moreover, Lattice Boltzmann numerical …

… The contact angle measurements were made at room temperature with a contact angle …
The contact angle value was the average of five measurement results at different positions …

… the porous Janus substrate: After coating the porous substrate conformally with PHFDMA
using iCVD, the substrate … (d) The contact angle data for the bare substrate and top and bottom …

… The contact angle was found to increase with substrate pore size, viz. 43.8, 53, and 60.6 for
… For a porous substrate with approximate porosity 60% and pore sizes varying from 50 nm to …

… tact angle θr by using the formula equation (4). We do the measurements on the porous media
… We deposit a droplet of liquid on the porous substrate, which is fixed by a clear Plexiglas …

… vapor deposition (PVD) onto rotating substrates at oblique angles (<70). After theoretical …
porous chiral thin films by increasing the deposition angle to >80 while rotating the substrate at …

… to the measured polarization will depend on the rotation angle. As discussed, we attribute
the dependence of the measured polarization parameter on the rotation angle to changes in …

… to quantitatively measure the wetting of the materials. Contact angle measurements were
carried out by applying droplets of 10 μl of distilled water to 1 cm 2 of the PC and SC substrate …

… Since the silicon wafer substrate supporting the porous film is … angular range of interest,
the scattered intensities in the small angle region (less than 5) are exclusively from the porous …