… The water droplet contact angles were measured by contact angle goniometry (Kruss DSA
… The average value of the water contact angle was determined by experimental drop profiles …

… angles between the substrate normal and the trajectory of the incident deposition flux are set
to be almost 90. Porous … The sp 3 fraction of the porous carbon films produced at intensity …

… Setting the time the drop settles on the substrate to be zero, we measure the contact angle
at 0.2 sec, 1 sec and 10 sec. Imagine the drop is part of a sphere, as shown in Figure 2.11. …

… Angle independent reflection properties, and the applicability of such porous Ge on various
metal substrates… To consider the angle dependency, we calculated the angle dependent …

… a lattice mismatch between the substrate and the PS layer:14 the substrate diffraction peak
S is narrow and intense while the porous layer diffraction peak PS, at a smaller angle, is less …

… Water was auto-pipetted on the PS surface, and we took water droplet images to calculate
the contact angle by an automatic measurement system (SCA software for OCA, DataPhysics …

… , allowing one to produce unique porous microstructured thin films.Examples … substrate-to-target
separation was 23 cm and the nominal flux angle a was measured from substrate …

… The contact angle of the polymer droplet (volume 2 μL) on modified AAO substrate was
measured by optical contact angle measurement (KRUSS DSA100, Germany). …

… uncoated glass were measured using a UV–vis-NIR Spectrometer (PERKIN–ELMER
Lambda 19). The transmittance over varying angles of incidence was measured using a custom-…

… drop base and wetted region, and contact angle fell on three universal curves if appropriate
… the wetted region inside the porous layer and dynamic contact angle on dimensionless time. …