… removal from aqueous solution because of their large specific surface area, high porosity,
and high reaction activity. In this article, adsorption removal … removal from aqueous solution. …

… removal from water by adsorption method is presented. We have reviewed various conventional
and non-conventional adsorbents which have been used for BPA removal … BPA removal …

… aqueous system has been compiled. This article provides the information about the defect,
adsorption sites on CNTs and batch adsorption … as contact time, solution pH, temperatures etc…

Phosphates removal from aqueous solutions was investigated using three different
inorganic materials: laboratory synthesized goethite, commercial alumina and commercial …

… TIC in removal of Pb(II) and Cd(II) ions from aqueous solutions by batch adsorption process.
According to our literature survey, no adsorption studies have been performed with TIC for …

The potentiality of low cost natural/agricultural waste biomasses for the removal of Cu(II) ion
from aqueous solution has been investigated in batch experiments. The effect of various …

… Therefore, there is an increasing demand for a highly-efficient and environmentally friendly
technology for the removal of PPCPs from aqueous solutions. Adsorption technology is an …

… adsorbent for the removal of copper(II) from wastewater. In this work, adsorption of copper
on sawdust has been studied by using batch techniques. The equilibrium adsorption level was …

… the adsorption and desorption characteristics of this tailing material for phosphate removal
from aqueous solutions were evaluated in small-scale experiments. The adsorption isotherms…

… for adsorptive removal of heavy … adsorptive removal of heavy metals with respect to adsorbent
dose are shown in Fig. 2 over the range 0.6–1.2 g/100 mL, at pH 6 the percentage removal …