… the fracture resistance of Lava Ultimate CAD/CAM RNC and the IPS e.max CAD ceramic.
Furthermore, the effect of bonding on the fracture resistance of Lava Ultimate CAD/CAM RNC …

… was to determine the fracture resistance and survival rate of … -aided manufacturing (CAD-CAM)
technology from ceramics, … of proximal box elevation on fracture resistance. Materials and …

… aging on the durability and fracture resistance behavior of occlusal veneers fabricated from
different CAD/CAM materials. All tested CAD/CAM materials exhibited a fracture resistance …

… aimed to compare the resistance to fracture of provisional … CAD/CAM systems. The null
hypothesis raised was that there would be no significant differences in the resistance to fracture …

… fit and fracture resistance of three CAD–CAM resin ceramic materials compared to CAD–CAM …
the relationship between internal fit and fracture resistance. The null hypotheses tested …

… Manufacturers have been developing new formulations of CAD/CAM … a CAD/CAM system
to produce a post-and-core system. Thus, this study evaluated (1) the fracture resistance after …

… fracture resistance between the different available CAD/CAM denture base resins. The results
also show that CAD/CAM … a higher fracture tolerance or a higher resistance against crack …

… way to study the fracture resistance of brittle … fracture resistance of CAD-CAM materials,
with and without a cyclic load test, concluding that masticatory fatigue did not affect the fracture …

… on fracture resistance (FR) of different ceramic materials used for CAD/CAM systems. …
using the same parameters and milled with a CAD/CAM system (CEREC SW 5.0, PrimeMill, …

… fracture resistance is unproven. The aim of this study was to compare fracture strength
and fatigue resistance of … with computer-aided design/computer-aided manufacturing (CAD/CAM). …