… From the results of this study, we conclude that RF magnetron sputtering is an excellent
method for forming stable, dense, and homogeneous Ca/P thin films on metal substrates. The …

… Sputtering utilizes a gas … RF magnetron sputtering it is indeed possible to deposit thin
Ca-P layers on titanium substrates. Since X-ray diffraction studies indicated that most assputtered …

… analysis on the physical vapor deposition magnetron sputtering (PVDMS) technique that …
magnetron sputtering process [39]. This article focuses mainly on PVD magnetron sputtering…

… coatings, particularly for calcium phosphate coatings. In the present work, therefore, calcium
phosphate films were prepared on CP–Ti substrates by RF magnetron sputtering using fully-…

… of the sputtering process is, however, critically dependent on obtaining reproducible coatings
with controlled surface properties. Therefore, the choice of sputter … on RF magnetron sputter …

… magnetron sputtering is well suited to coat implant metals and alloys with a thin layer of
bioactive calcium phosphate… the biological performance of rf-magnetron-deposited coatings, …

… ) magnetron sputter deposition … calcium-phosphate (CaP) coatings has been reported. A
phenomenological model was developed to explain the formation of the RF magnetron sputter-…

… Bioactive calcium phosphate coatings were deposited by radio-frequency magnetron
sputtering from biphasic targets of hydroxyapatite and tricalcium phosphate, sintered at different …

… In the present work, we investigated the nanostructure of calcium phosphate films formed …
/min) by radio-frequency magnetron sputtering. The sputtering deposition parameters and the …

… of calcium phosphate thin films on CP-Ti substrates using radiofrequency (RF) magnetron
sputtering with hot-pressed -tricalcium phosphate ( -TCP) plates as the sputtering target and …