… An IML-RESI PD 400 drilling tool and a standard spade drill bit (IML System GmbH, … study
the impact of white and brown rot decay on drilling resistance (DR) measurements in wood. In …

… In this study, drilling resistance (DR) measurements were used to quantify the effect of fungal
decay in … LVL caused by white rot fungi. Material specific peculiarities and their effect on the …

… resistance profiles increased the prediction power of the drilling resistance as a nondestructive
measure … similar patterns with drilling resistance which is useful in decay detection, but it …

… and type of fungal rot in the Norway spruce (Picea abies) logs using the drill-resistance device
“… of log attacked by white rot and in a one section of log attacked by brown rot (Figure 5). In …

… measurements. In the case of pathogenically altered wood, the peaks of the drill resistance
… In comparison to white rot, brown rot causes a reduction in drill resistance even at lower val…

… that drill resistance measurements in combination with a coarse classification of decay classes
… For example, the decay type, namely brown rot versus white rot fungi, may influence the …

… drilling tool is portable, measurements are made in situ, it is quick and minimally invasive, and
it has high sensitivity for fungal decay … decay (Figure 5), it was not possible to measure the …

… Drilling resistance (DR) measurements for evaluating wood properties … Drilling resistance
measurement and the effect of shaft friction – using feed force information for improving decay …

… of the drill bit on the drilling resistance (DR) measurements. The study … Drilling resistance
measurement and the effect of shaft friction – using feed force information for improving decay …

… drill resistance in combination with the traditional volumetric method as a method for measuring
wood with stem decay … density, the decay type, namely brown rot or white rot fungi [11, 20…