… article, maximum acceptable effort (MAE) refers to an average maximum acceptable force
(MAF) or torque (MAT) that is normalized as a percentage of the average maximum force or …

… endurance times and levels of effort (percentage of maximum). There is growing attention, …
an MCL of less than 10% MVE seem acceptable, provided that the tasks do not consist of …

… load than the frequency at which the task is performed for the range of high frequency efforts
… In summary, the maximum acceptable torque in in-line screw running was determined using …

… : The maximum acceptable effort (MAE) equation can be used by ergonomists to estimate
acceptable forces and torques where both duty cycle (DC) is known and maximum strength …

… Hence, a maximum TDC of 1% implies that LPWAN motes have a maximum permitted TDC
… Some of the published works in this field devote their efforts to analyzing the performance of …

… Recently, there have been some efforts at higher layers of … scheduler a range of acceptable
duty cycling ratios, and the … PA and PS watts, the maximum allowable allowed DC is given in (…

… for assessment of acceptable effort and duty cycle. The participants in the current study were
asked to set a maximum acceptable work demand (Criterion #1) that was acceptable for an …

… maximal acceptable effort (MAE) for repetitive tasks based on the product of task frequency
and effort … to be the maximum lift or lower load acceptable (MAWL) for one effort per, which …

… to estimate the maximum acceptable effort (MAE) of an isolated subtask, based on Duty
Cycle (DC = holding time as a percentage of cycle time) as a percentage of maximum strength. …

… the results of psychophysically determined maximum allowable torque using a simulated
in-… load rather than the frequency at which the task is performed for the high frequency efforts …