… The last bulk-fill composite tested, Tetric Evo Ceram Bulk Fill, demonstrated a unique pattern
of internal gap dye penetration (Fig. 11). Although this product indicated gap formation at …

… bulk-fill composites into the market, studies on the polymerization shrinkage of different brands
of bulk-fill … of five bulk-fill composites in comparison with a conventional composite resin. …

… in depth in Tetric EvoCeram Bulk Fill, although less change … compared with Tetric EvoCeram
Bulk Fill is thus repealed by … a material in bulk was lower for Tetric EvoCeram Bulk Fill (5.88 …

This study investigated the viscoelastic properties of contemporary bulk-fill restoratives in
distilled water and artificial saliva using dynamic mechanical analysis. The materials evaluated …

… Thus the higher value of flexural strength and flexural … flexural properties when measured
immediately after polishing and after 1-day storage. This could be attributed to their similar filler-…

… In vitro, flexural strength testing has been demonstrated to be … that Bulk-Fill RBCs generally
have a higher flexural strength … the Bulk-Fill materials tested demonstrated a higher flexural …

… Purpose: The aim of this study was to measure the flexural properties of fiber-reinforced
composite (FRC) used in frameworks of fixed partial dentures. In addition, the influence of water …

… differences in filler loading, which result in different rheological properties. In the present
study, a positive correlation between the flexural modulus and filler fraction was observed. The …

… of conversion, the bulk fill composite (either flowable … properties such as top hardness,
bottom hardness, flexural strength, compressive strength and tensile strength, the flowable bulk fill …

… Adequate depth of cure of the bulk fill resin used in the present study might have contributed
to this result. The bulk fill resin TetricEvoCeram Bulk used in the present study contains a …