… An output matcher is needed to produce an axially symmetric beam exiting the RFQ to
match the beam to a subsequent solenoid-based focusing lattice. Instead of the more standard …

… We demonstrated a high power and good beam quality continuous-wave (CW) Tm:YAP
slab … The pump beam was collimated and focused by a coupling system, which included two …

… count ranging from 64 to 1024 and continuous wave frequency of 1.5 MHz. First, we show
that a 50% spherical annulus produces focus beam side lobes which decay as a function of …

… The first rebuncher is required to create a time focus of the beam at the location of the
stripper to minimize longitudinal emittance growth due to energy straggling. This rebuncher is …

… beam, considered in the present paper, that distinguishes it from other electromagnetic
waves … in the long-wavelength limit, is that a beam propagates in one direction, or in a narrow …

… Travel speed and laser beam power largely control the way these forces are balanced, as
well as welding mode (Continuous Wave or Square Wave) and shielding gas type [1]. A study …

… the thermal focusing due to … focusing length comparable to the cavity length of a typical
diode end-pumped laser. In endeavoring to obtain higher output powers from continuous-wave (…

… Diagrams of the geometry of the focused beam from a 1 Mc projector, whose concave …
thermocouple scan across the beam axis in the focal plane of a 3-025 Mc/s beam. Note the …

… focused beams neglecting the influence of the scattered field on the pump wave not only
results in narrowing of the WFR wave … increase with distance from the beam axis. An analysis is …

… The direction of the THz beam is changed by a 50.8 mm diameter gold-coated … beam is
focused using the gold-coated off-axis parabolic mirror (PM 5 ). The radius of the focused beam …