… have been deposited on glass substrates. Alumina films thicker than 500nm deposited on
PMMA … Multilayer systems of alumina and zirconia are deposited on micro-optics of PMMA, as …

… coated on the substrate Ti6Al4V by pulsed laser deposition (… coating with the substrate is
higher than that of 45S5 coating. … bioglass coatings is similar to that of 45S5 bioglass coatings …

… wet and plasma assisted deposition methods were proposed in the scientific literature. In
this review, we considered films obtained by nanosecond Pulsed Laser Deposition (PLD). …

… Bioactive-glass coatings can serve that purpose for the bone implants. We report a … glass
coating on titanium substrate using the pulsed laser deposition method and present the coating …

… -induced defects in the coated layer. This work reports suitability of using pulsed laser
deposition for the preparation of thin film amorphous metallic coating to achieve improved …

… Silicate (13-93) and borate (13-93-B3) bioactive glass coatings were successfully deposited
on titanium using the nanosecond Pulsed Laser Deposition technique. The coatings’ …

… We report on the synthesis by pulsed laser deposition with a KrF* excimer laser source (λ
= … cultured on pulsed laser deposited bioglasses. Both types of glass films proved to be …

… Titanium substrate by pulsed laser deposition method is evaluated. Raman and IR … in
coatings by pulse laser deposition method. Comparative studies on nanostructured bioactive glass …

… deposition (PLD) technique. A Nd:YAG laser (532 nm) based pulsed laser deposition
system has been used for this work. Post deposition, surface morphology, and chemical …

… gel derived glass–ceramic targets were applied for the first time for PLD deposition of coatings.
For … [39], which evidenced the amorphous nature of the glass coatings deposited at lower …