… based on the laser cladding technique to create large bioactive glass monoliths of … glass
powder) by a carrier gas over a substrate that is moving beneath the powder flow and the laser …

… laser cladding to generate three-dimensional bioactive glass implants without moulds or
preplaced powder bed. 45S5 bioactive glass and lower crystallization tendency S520 bioactive …

Laser cladding by powder injection has been used to produce bioactive glass coatings on
titanium alloy (Ti6Al4V) substrates. Bioactive glass compositions alternative to 45S5 Bioglass …

… (MG) proved to be an excellent material for biomedical implant applications because of their
… substrate using laser cladding technique is proposed in this research work. Laser cladding (…

… during laser cladding of bioactive glass coatings … implants increases bone-implant contact
in the early growth period increasing primary implant fixation and reduce the risk early implant …

… bearing biomedical implants was obtained for the first time by laser cladding of S520
bioactive glass onto ultrafine-grained commercially pure titanium. The cladding process affected …

… feeding belongs to the wide class of additive manufacturing techniques [32] and has recently
been investigated in the biomaterials field for the production of small bioceramic implants …

… The laser cladding parameters used in the current work are 2000 W laser power, 25 mm/s
scanning speed, 4 × 6 mm laser spot, and 25% overlap. These parameters have been …

… In this research, laser cladding of superior wear resistant FeCrMoCB MG composite coating
on Cronidur30 is proposed. Three levels of specific energy and scanning speed, as well as …

… Numerous researches focused on using laser cladding techniques to develop MG coating
layer (CL) on different metallic substrates. The studies reported that the LC techniques are …