… type and design,21,22 component wear,23,24 and implant angulation.Predictably, … of
implant angulations and attachment configurations on the retentive forces of locator attachment– …

… values when used with nonparallel implant configurations. … implant angulation and
retentiveness on parallel attachments. The functional rotational threshold of the Preci Clix …

… the effect of implant angulation, objective data were examined for implants inclined up to 15
… : Comparison between rigid and resilient attachment configurations. Med Eng Phys 2008;30:…

… Statistical models demonstrated no effect of implant angulation on retention, except for 60
after … Angulations of 40 or higher were shown to lead to lower retentive forces (0 vs. 40 cycle …

… The present in vitro study investigated the effect of implant angulation and cyclic … attachments.
The results of this study indicate that implant angulations negatively affect the attachment …

… implants depend upon mechanical components to provide retention. Ball attachments are
… , but retentive capacity of these components may be altered by a lack of implant parallelism. …

… Two configurations are available, D20 and D60. SFI-Anchor ® D20 (Ø5.3mm × h2.5 mm)
is … ® attachment, that is, the implant angulation (up to 60) has no effect on this attachment's …

… implant angulation on the retention of implant-supported overdentures by comparing the
Locator and ball attachment … that in both settings (0 and 20) the Locator attachment had a faster …

… According to the results of the present study, as implant angulations increase, distortion in
… Especially in multiple-implant cases, an increase in implant angulations increases the area …

… to the implant inclination. In the present study, the unsplinted anchorage attachments used
in mandibular single and two-implant … as the angulations increased among all attachments, …