… ] but not for bioactive glass coatings. Therefore, the purpose of the present study was to
investigate the potential of the laser cladding technique to produce a bioactive glass coating on …

… Bioglass coatings derived from electrophoretic deposition method were fused on Ti surface
by laser cladding process using a continuous CO 2 laser. … from the bioglass matrix and the …

… bioglass coatings is similar to that of 45S5 bioglass coatings and follows the bioactive
mechanism. The bioactivity level of Mg10 coating is lower than that of 45S5 coating… in the bioglass …

… the laser-… bioactive glass-ceramic thin films belonging to SiO 2 ‒P 2 O 5 ‒CaO‒MgO‒Na
2 O oxide system, with the aim of proposing a new type of magnesium incorporating coatings …

… source (λ = 248 nm, τ = 25 ns) of bioglass thin films of 6P57 and 6P61 types. Physiology, …
cultured on pulsed laser deposited bioglasses. Both types of glass films proved to be …

… This process is referred to as pulsed laser deposition (PLD). … in the current study of the
bioglass films. As mentioned earlier, a number of techniques for bioglass films have already been …

… Bioactive-glass coatings can serve that purpose for the bone implants. … bioactive-glass
coating on titanium substrate using the pulsed laser deposition method and present the coating …

… Silicate (13-93) and borate (13-93-B3) bioactive glass coatings were successfully deposited
on titanium using the nanosecond Pulsed Laser Deposition technique. The coatings’ …

… of a Bioglass target. In this paper, we will analyse more in … deposited films in order to clarify
the ablation–deposition mechanism and evaluate the real bioactivity of our Bioglass coatings. …

… the deposition head and would result in Ti composite coatings with … laser deposition of these
composite coatings showed that sound coatings can be obtained at 200 W and 300 W laser …