… mechanical properties expressed by hardness, elastic modulus, post-gel shrinkage, compressive
and tensile strength … stress distributions of new bulk-fill composites in molars with large …

… and bulk/incremental filling techniques on the mechanical … tooth deformation, bond strength,
and mechanical properties. The … filling techniques would not affect cuspal deformation, bond …

… The incremental cuspal deformation also leads to a reduction in the volume of the cavity, …
filling technique on cuspal deflection, microtensile bond strength, and mechanical properties of …

… -fill materials would be significantly better using the bulk fill technique than with use of the
incremental fill technique… for incremental placement between bulk and incremental placement, …

… incremental technique. Under constrained conditions, the bonding capacity to cavity walls
might be strongly influenced by the filling technique compared with the mechanical property of …

… Incremental filling techniques for composites have been suggested to minimize … The average
maximum thickness recommended for each increment of regular composites is 2 mm, and …

… mechanical properties of bulk fill composite compared to conventional incremental composites.
… and provide them with a less technique sensitive material, claiming the suitability of bulk …

… for geometry and material properties, it … properties of natural tooth, but successfully excluded
the significant specimen variance. This study showed that the incremental filling technique …

… to have mechanical properties … new material class is stated that it can be placed in a 4 mm
thickness bulks to be cured in one step instead of the current incremental placement technique…

… Groups 4 and 5: Bulk-fill technique: Etching and bonding procedure was similar to that of
Group 3. The cavities were filled with a single increment to restore the final contour and light …