… this interface by insertion of a copper phthalocyanine (CuPc) monolayer as a primer between
Ag(111), Au(111), and Cu(100) surfaces and the organic semiconductor pentacene (PEN). …

… of organic materials and the thickness of organic thin-film is checked by an ellipsometry
measurement. The thickness of both CuPc and pentacene film is set to be 30 nm in this study …

… of pentacene steps as the coverage increases) [21], [29]. For this study, pentacene films with
… CuPc arranged in the l-configuration. Fig. 2e shows the AFM topography image of the F 16 …

… pentacene thin-film transistors with a F 16 CuPc inter-layer. … multilayer films with pentacene/Ag
and pentacene/F 16 CuPc/Ag … The deposition rates of pentacene and F 16 CuPc were …

… The PMMA surface was almost covered by pentacene … pentacene film with a film thickness
of 5 nm; the pentacene has fully covered the PMMA, and gaps were fully filled by pentacene. …

… Observably, the injection barrier is smaller between Au and CuPC than that between Au and
pentacene. If we assume that no interface dipole is formed between CuPC and pentacene, …

… , copper phthalocyanine (CuPc) and pentacene double sensing membranes were used in
organic thin-film … To study the thickness effect of CuPc layer, various-thick CuPc layers were, …

… -phthalocyanine (CuPc)/C 60 /Al organic solar cells (OSCs), by using the EFISHG … In this
report, we prepared IZO/pentacene/CuPc/C 60 /Al OSCs with a Cu-phthalocyanine (CuPc) layer …

… of pentacene/graphite, pentacene/Cu-phthalocyanine (CuPc)/graphite, and pentacene ∕
Si … as a function of the thickness of the pentacene film. We observed that the binding energy …

… We have fabricated efficient heterojunction organic photovoltaic (OPV) cells based on
pentacene-doped copper(II) phthalocyanine (CuPc) layer as donor and fullerene (C60) layer as …