… the adsorbent should be granular so that the adsorbent scan … , highly selective toward
phosphate and will not cause any … /inorganic hybrid adsorbent for removal of phosphate from …

… In this study, the removal and recovery of phosphorus (P) were evaluated on fixed-bed
column systems using a hybrid adsorbent, ie HFeO. The effect of flow rates (1.0–2.5 mL/min) and …

… development of adsorbents for phosphate removal, most specifically, the adsorption by
metal-based materials, mesoporous materials, organic and metal-organic hybrid materials, …

… The competitive adsorption of arsenic(V) and phosphate was carried out to understand
the … adsorbent. The composite adsorbent was slightly preferred to phosphate over arsenic(V). …

… and hydrated zirconia impregnated AE resin are reported as hybrid adsorbents. To illustrate,
ZM NPs impregnated AE resin was formed as a hybrid adsorbent (ZMAE), in which ZM NPs …

… The objective of this research was to test a hybrid adsorption/ultrafiltration process for
phosphate removal from secondary effluent using two fine fraction iron hydroxide adsorbents, …

… regeneration of the prepared ZIF8@CNT-2 in this study, implying the possible cost-effective
ZIF8@CNT-2 hybrid regeneration method for phosphate removal in the predictable future. …

… a similar polymeric hybrid adsorbent HFO-201, and examined its potential use for enhanced
removal of phosphate from industrial effluents. Considering phosphate in many industrial …

… Phosphate removal from aqueous waste streams is an important approach to control the …
A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was …

… The aim of this study was mainly to find out the effect adsorbent doses on the removal of
phosphate from HR-MBR effluent without changing any hydrodynamic parameter such as flux. …