… -state polymer electrolyte achieves maximum Li … polymer electrolyte demonstrates outstanding
stable cycling in the LiFePO 4 /Li and LiNi 0.8 Mn 0.1 Co 0.1 O 2 /Li (3.0–4.4 V, 200 cycles…

… Here we describe a new type of nanocomposite solid polymer electrolyte (NSPE), obtained
… 2 O 3 fillers, improving markedly the cycling performance of solid-state rechargeable LMBs. …

… by the PTMC 1 NaFSI electrolyte and cycled at 60 C. Unfortunately, as seen in Figure 5a,
after an initial increase in capacity followed by stable cycling for some 20 cycles at up to 1C, the …

… polymer network, a tough polymer electrolyte was developed with high conductivity, and
stable … The double network (DNW) gel electrolyte has high modulus and high fracture energy …

… Therefore, a LiNi 0.8 Co 0.15 Al 0.05 O 2 /Li cell showed a high capacity of 200 mA hg −1 at
0.1 C and stable cycling beyond 100 cycles at 0.5 C with a capacity retention of 80% at room …

… strategy to design solid polymer electrolytes with excellent properties… stable cycling. The
current study has shed light on the design and in situ polymerization of solid polymer electrolyte …

… 4(a) can be classified into two regions: (1) stable cycling during the initial tens of charge/discharge
cycles and (2) continuous capacity degradation following the stable cycles. These two …

… 70% after 300 cycles at 0.5 C compared with that of 29% for liquid electrolyte) owing to abundant
… Our work presents a reliable and efficient GPE enabling stable cycling of Li-S batteries, …

… The polymer matrix in the electrolyte locally constrains the discharge products, thereby …
As-prepared GPEs in Na-SPAN full cell exhibit extremely stable cycling over 2500 cycles …

… stability of the electrolyte. Furthermore, considering the high ionic conductivity and high safety
of gel polymer electrolytes (… As we known, the GPEs is a kind of polymer electrolytes which …