The influence of a nominal external electric field E= 3 to 10 kV/cm on the sintering of iron
powder compacts for 30 minutes at 1140° C in a vacuum of∼ 10− 6 torr was investigated. It …

In the process of intensified sintering of iron powders under the action of an electric field with
low voltage and high current, the effect of sintering temperature and sintering time on the …

This paper describes a series of experiments conducted on the common Fe powder metal
alloy 4401 in which the material was compacted during the application of DC current and …

A new rapid sintering technique for iron powders compacted under the action of an electric
field with high current density has been advanced. The results show that the sintering …

Abstract A Fe-40 at.% Al loosely packed powder mixture was subjected to pressureless
treatment in a vacuum chamber of a Spark Plasma Sintering facility and sintered in a hot …

The influence of the applied pressure and electrical parameters on the macrostructure of
specimens consolidated by the medium-frequency electrical resistance sintering technique …

This paper reports the premolding load effect on the electrical behavior in the initial stage of
electric current activated sintering of carbonyl iron powders. An electrical network model is …

Commercially pure (CP) iron powders with a deliberate high degree of oxidation were
consolidated by medium-frequency electrical resistance sintering (MF-ERS). This is a …

A novel sintering technology based on high density electric currents and sintering cycles
shorter than a second is presented. Data will be shown that compare it to Hot Pressing and …

In [I-5], the results are presented of investigations into the characteristics of porous iron
sintered by various methods. It has been shown [i] that sintering by the electric contact …