The specimens of Ti–6Al–4V alloy were irradiated under the simulated ion beams of
hydrogen and nitrogen. The microstructures of the alloy before and after irradiations are …

This study focuses on the analysis of microstructural, elemental and phase compositions of
surface and near-surface layers of titanium after the implantation of aluminium. A titanium …

Helium preimplantation and neutron irradiation influence on the tensile properties of
vanadium alloys in the irradiation/test temperature range of 500–800° C were investigated …

Irradiation hardening behavior of V–4Cr–4Ti and V–4Cr–4Ti–0.15 Y alloys after Cu-ion
beam irradiation were investigated with a combination between nanoindentation techniques …

Neutron irradiation damage and its effects on mechanical properties were studied for V-20Ti
alloy with three different fluences: 5× 10 24, 2× 10 24 and 1× 10 23 nm-2 (E> l MeV), named …

The recovery characteristics of neutron-irradiated pure V and V–Ti alloys with 1.0 and 4.5
at.% Ti have been investigated by positron annihilation spectroscopy. Microvoid formation …

Results are provided for a study of the effect of mechanical and ion-beam treatment on
titanium alloys surface relief parameters. The possibility is demonstrated of changing …

The paper presents the results of the investigation of VT6 titanium alloy subjected to electro-
explosion alloying with TiB2 and irradiation with pulsed electron beam. It was established …

Currently, titanium is demanded in various industries. The technical basis for the use of
titanium alloys as structural materials for nuclear power engineering are: the high strength …

The effect of titanium doping on accumulation and annealing of radiation defects was
investigated in austenitic stainless steel 16Cr15Ni3Mo under low temperature (80 K) …