In this work the possibility of use glycols in extractive desulfurization will be discussed based
on liquid–liquid phase equilibria (LLE) measurements for {glycol (1)+ aromatic sulfur …

This study provides the complete liquid–liquid equilibrium (LLE) data including the solubility
curves and tie-lines for heptane+ thiophene+ tetraethylene glycol and cyclohexane+ …

Today there are serious regulations to reduce sulfur content of fuels because the SO x
produced during the combustion of fuels containing sulfur compounds make the air polluted …

Thiophene, benzothiophene, and dibenzothiophene were extracted from isooctane using
water and aqueous solutions of hydrochloric acid, sulfuric acid, nitric acid, acetic acid …

In this work, extractive desulfurization of model fuel containing dibenzothiophene (DBT) and
thiophene (Th) as sulfur compounds was carried out using 16 different Deep Eutectic …

Removal of sulfur species from fuels is an increasingly critical environmental issue.
Hydrodesulfurization (HDS) removes sulfur compounds, such as mercaptans and sulfides …

Among the most important causes of air pollution we may refer to hydrocarbon fuels with a
large content of organosulfur compounds. These compounds must be removed to the level …

To meet the stringent requirements for sulfur content in gasoline, fuel oil desulfurization has
become an indispensable process in petrochemical production. This study aimed to extract …

Desulfurization of gasoline and diesel models is investigated through liquid–liquid extraction
of thiophene (C4H4S) from n-paraffin compounds. Ionic solvents of 4-methyl-N …

Benzothiophene, Dibenzothiophene (DBT), 4-methyldibenzothiophene, and 4, 6-
dimethyldibenzothiophene are typical thiophenic compounds prevailing in diesel fuels …