Early stage reactivity and in vitro behavior of silica-based bioactive glasses and glass-ceramics
The surface reactivity of different sets of glasses and glass-ceramics belonging to the SiO 2–
P 2 O 5–CaO–MgO–K 2 O–Na 2 O system have been investigated. The attention was …
P 2 O 5–CaO–MgO–K 2 O–Na 2 O system have been investigated. The attention was …
Laser sintering and crystallization of a bioactive glass-ceramic
KP O'Flynn, KT Stanton - Journal of non-crystalline solids, 2013 - Elsevier
Glass-ceramics are formed from metastable glasses that crystallize to one or more ceramic
phases upon heating. Most bioactive glass-ceramics require conventional sintering in an …
phases upon heating. Most bioactive glass-ceramics require conventional sintering in an …
Synthesis and characterisation of sol gel derived bioactive glass for biomedical applications
A Balamurugan, G Sockalingum, J Michel, J Fauré… - Materials Letters, 2006 - Elsevier
Bioactive glasses have been used successfully as bone-filling materials in orthopaedic and
dental surgery, but their poor mechanical strength limits their applications in load-bearing …
dental surgery, but their poor mechanical strength limits their applications in load-bearing …
Manufacturing of silicon–Bioactive glass scaffolds by selective laser melting for bone tissue engineering
CS Rodrigo-Vázquez, N Kamboj, M Aghayan… - Ceramics …, 2020 - Elsevier
The irruption of additive manufacturing techniques opens the possibility to develop three-
dimensional structures with complex geometries and high precision. In the current …
dimensional structures with complex geometries and high precision. In the current …
Fabrication of bioactive glass-ceramics by selective laser sintering
RD Goodridge, C Ohtsuki, M Kamitakahara… - Key Engineering …, 2006 - Trans Tech Publ
The feasibility of processing glass-ceramics using the layer manufacturing technique,
selective laser sintering (SLS), to produce parts with suitable biological and mechanical …
selective laser sintering (SLS), to produce parts with suitable biological and mechanical …
A comparative study between melt-derived and sol-gel synthesized 45S5 bioactive glasses
In the last years, bioactive glasses and glass-ceramics drew the attention for their
application in the production of implants. Among them, Bioglass® 45S5 is the most …
application in the production of implants. Among them, Bioglass® 45S5 is the most …
Effects of Mg and Zn on the surface of doped melt-derived glass for biomaterials applications
E Dietrich, H Oudadesse, A Lucas-Girot, Y Le Gal… - Applied Surface …, 2008 - Elsevier
Bioactive glasses in the system SiO2–CaO–Na2O–P2O5 were synthesized pure and doped
with magnesium or zinc by melt-derived method. The bioactivity was studied during in vitro …
with magnesium or zinc by melt-derived method. The bioactivity was studied during in vitro …
Laser machining and in vitro assessment of wollastonite-tricalcium phosphate eutectic glasses and glass-ceramics
D Sola, L Grima - Materials, 2018 - mdpi.com
Bioactivity and ingrowth of ceramic implants is commonly enhanced by a suitable
interconnected porous network. In this work, the laser machining of CaSiO3‒Ca3 (PO4) 2 …
interconnected porous network. In this work, the laser machining of CaSiO3‒Ca3 (PO4) 2 …
Pulsed laser deposition of bioactive glass films in ammonia and disilane atmospheres
The effect of two reactive gases on the properties of bioactive glass thin films produced by
pulsed laser deposition (PLD) was studied. The ablation of a bioactive silica-based glass …
pulsed laser deposition (PLD) was studied. The ablation of a bioactive silica-based glass …
Surface treatment of 45S5 Bioglass using femtosecond laser to achieve superior growth of hydroxyapatite
45S5 Hench bioglass (BG) has gained interest in research because of its potential clinical
applications. Several studies in-vivo and in-vitro have been in progress to improve …
applications. Several studies in-vivo and in-vitro have been in progress to improve …