The plasma spray (PS) technique is the most popular method commercially in use to
produce calcium phosphate (CaP) coatings to promote fixation and osteointegration of the …

Calcium phosphate (CaP) bioceramics, especially hydroxyapatite (HA), have been used as
coatings on implants owing to their biocompatible properties. The commercial practice for …

Amorphous calcium phosphate coatings were produced by pulsed laser deposition from
targets of nonstoichiometric hydroxyapatite (Ca/P= 1.70) at a low substrate temperature of …

With an ageing population, war, and sports related injuries there is an ever-expanding
requirement for hard tissue replacement such as bone. Engineered artificial scaffold …

Three different calcium phosphate coatings of crystalline hydroxyapatite (HA), α‐and β‐
tricalcium phosphate (α+ β‐TCP), or amorphous calcium phosphate (ACP) obtained by …

Simple, mild, and area‐specific calcium phosphate (CaP) coating techniques are useful for
the production and surface modification of biomaterials. In this study, an area‐specific CaP …

This chapter reviews the work performed by the international research community on the
production of thin calcium phosphate (CaP) coatings by pulsed laser deposition (PLD) …

Pulsed laser deposited calcium phosphate coating on titanium alloy have been tested under
simulated physiological conditions in order to evaluate the changes in morphology …

Calcium phosphate coatings were deposited by pulsed laser ablation with a radiation of
355nm from a Nd: YAG laser. All the coatings were obtained at the same conditions, but …

In this report, bioactive calcium phosphate (CaP) coatings were produced on titanium (Ti) by
using phosphate‐based glass (P‐glass) and hydroxyapatite (HA), and their feasibility for …