Morphology and properties of novel blends prepared from simultaneous in situ polymerization and compatibilization of macrocyclic carbonates and maleated poly …

SA Madbouly, JU Otaigbe… - … Chemistry and Physics, 2006 - Wiley Online Library
Nanoscale polymer blend morphologies, with a dispersed minor phase as small as 50 nm,
have been prepared via the in situ polymerization of macrocyclic carbonates in the presence …

Morphological consequences of interchange reactions during solid state copolymerization in poly (ethylene terephthalate) and polycarbonate oligomers

EB Gowd, C Ramesh - Polymer, 2005 - Elsevier
Poly (ethylene terephthalate)(PET)(IV: 0.15 dL/g) oligomer was obtained by
depolymerisation of high molecular weight PET. Polycarbonate (PC) oligomer (IV: 0.15 dL/g) …

[引用][C] The effects of molecular weight on polycarbonate–polybutylene terephthalate blends

DG Hamilton, RR Gallucci - Journal of applied polymer science, 1993 - Wiley Online Library
Polycarbonate-polyester blends have attracted both commercial and academic interest for
over 10 years.'In particular, the blending of BPA polycarbonate (PC) with polybutylene …

Synthesis of biodegradable high molecular weight polycarbonates from 1, 3‐trimethylene carbonate and 2, 2‐dimethyltrimethylene carbonate

M Pastusiak, P Dobrzynski… - Journal of Applied …, 2014 - Wiley Online Library
The possibility to obtain biodegradable high molecular weight aliphatic polycarbonates from
trimethylene carbonate (TMC) and 2, 2‐dimethyltrimethylene carbonate (DTC) monomers …

Obtaining aliphatic branched polycarbonates via simple copolymerization of trimethylene carbonate with cyclic carbonate containing pendant ester groups

M Pastusiak, J Jaworska, M Kawalec… - Journal of Polymer …, 2017 - Wiley Online Library
Different possibilities for obtaining branched, functional carbonate copolymers are
presented in this study. Copolymers were synthesized according to the ring‐opening …

Compatibilization of polycarbonate/poly (ethylene terephthalate) blends by addition of their transesterification product

M Habibollahi, M Ehsani, J Morshedian - Polyolefins Journal, 2019 - poj.ippi.ac.ir
In this study, poly carbonate (PC) and poly (ethylene terephthalate)(PET) were reactive melt-
blended under two different conditions to produce PC/PET copolymers. For each condition …

Synthesis, characterization and hydrolysis of an aliphatic polycarbonate by terpolymerization of carbon dioxide, propylene oxide and maleic anhydride

Y Liu, K Huang, D Peng, H Wu - Polymer, 2006 - Elsevier
Terpolymerization of propylene oxide (PO), carbon dioxide (CO2) and maleic anhydride
(MA) was carried out by using a polymer-supported bimetallic complex (PBM) as a catalyst …

High Molar Mass Poly(trimethylene carbonate) by Ph2BiOEt and Ph2BiBr-Initiated Ring-Opening Polymerizations

HR Kricheldorf, G Behnken, G Schwarz… - … Science®, Part A …, 2009 - Taylor & Francis
Trimethylene carbonate,(TMC), was polymerized in bulk with Ph2BiOEt or Ph2BiBr as
initiators. The dependence of the molecular weight on the monomer-initiator ratio (M/I) and …

Carbon dioxide–derived poly (propylene carbonate) as a matrix for composites and nanocomposites: performances and applications

R Muthuraj, T Mekonnen - Macromolecular Materials and …, 2018 - Wiley Online Library
The conversion of CO2 into polymers such as poly (propylene carbonate)(PPC) can
contribute to the reduction of dependence on fossil fuel resourced polymers. PPC is a …

Synthesis of trimethylene carbonate/ϵ‐caprolactone copolymers initiated with zinc alkoxide: influence of copolymer chain microstructure on thermal and mechanical …

M Pastusiak, P Dobrzynski, J Kasperczyk… - Polymer …, 2017 - Wiley Online Library
Ethylzinc (II) ethoxide is a highly active and efficient initiator for the bulk polymerization of 1,
3‐trimethylene carbonate and its copolymerization with ϵ‐caprolactone. This initiator allows …