Incorporation of ZnO–ZrO2 nanoparticles into TiO2 coatings obtained by PEO on Ti–6Al–4V substrate and evaluation of its corrosion behavior, microstructural and …
M Nadimi, C Dehghanian - Ceramics International, 2021 - Elsevier
Abstract In this research, Plasma Electrolytic Oxidation technique was used to incorporate
ZnO–ZrO 2 nanoparticles into TiO 2 ceramic coating on Ti6–Al–4V using sodium phosphate …
ZnO–ZrO 2 nanoparticles into TiO 2 ceramic coating on Ti6–Al–4V using sodium phosphate …
Study of the effect of ZnO nanoparticles addition to PEO coatings on pure titanium substrate: Microstructural analysis, antibacterial effect and corrosion behavior of …
In this work, a phosphate-based electrolyte, containing ZnO nanoparticles in concentrations
of (0, 5, 10, and 15 g/L), was used to achieve coatings on pure titanium by using plasma …
of (0, 5, 10, and 15 g/L), was used to achieve coatings on pure titanium by using plasma …
Enhancing cytocompatibility, antibacterial activity and corrosion resistance of PEO coatings on titanium using incorporated ZrO2 nanoparticles
M Molaei, A Fattah-alhosseini, M Nouri… - Surfaces and …, 2022 - Elsevier
This study aims to present the influence of adding three different concentrations (1, 3, and 5
g/L) of ZrO 2 nanoparticles (NPs) into the electrolyte of the plasma electrolytic oxidation …
g/L) of ZrO 2 nanoparticles (NPs) into the electrolyte of the plasma electrolytic oxidation …
Effect of ZrO2 nanoparticles addition to PEO coatings on Ti–6Al–4V substrate: Microstructural analysis, corrosion behavior and antibacterial effect of coatings in Hank's …
In this study, plasma electrolyte oxidation (PEO) method was employed to modify the surface
of Ti–6Al–4V. Effects of different concentrations of ZrO 2 nanoparticles (0, 1, 3 and 5 g/l) into …
of Ti–6Al–4V. Effects of different concentrations of ZrO 2 nanoparticles (0, 1, 3 and 5 g/l) into …
Incorporating TiO2 nanoparticles to enhance corrosion resistance, cytocompatibility, and antibacterial properties of PEO ceramic coatings on titanium
M Molaei, A Fattah-alhosseini, M Nouri… - Ceramics …, 2022 - Elsevier
This study aimed to investigate the influence of incorporating different concentrations (1, 3,
and 5 g/l) of anatase-TiO 2 nanoparticles (NPs) on morphology, roughness, wettability …
and 5 g/l) of anatase-TiO 2 nanoparticles (NPs) on morphology, roughness, wettability …
An investigation on ZrO2 nano-particle incorporation, surface properties and electrochemical corrosion behaviour of PEO coating formed on Cp-Ti
S Gowtham, S Hariprasad, T Arunnellaiappan… - Surface and Coatings …, 2017 - Elsevier
Abstract Plasma Electrolytic Oxidation technique was used to produce nano-sized zirconia
incorporated ceramic coating over commercially pure titanium using electrolytes with varying …
incorporated ceramic coating over commercially pure titanium using electrolytes with varying …
Influence of coating parameter and sintering atmosphere on the corrosion resistance behavior of electrophoretically deposited composite coatings
U Vijayalakshmi, M Chellappa… - Materials and …, 2016 - Taylor & Francis
The purpose of this study is to synthesize and characterize nanosized titania (TiO2), zinc
oxide (ZnO), and its composite coating on Ti–6Al–4V to enhance its corrosion protection …
oxide (ZnO), and its composite coating on Ti–6Al–4V to enhance its corrosion protection …
Effects of alumina nanoparticles concentration on microstructure and corrosion behavior of coatings formed on titanium substrate via PEO process
Plasma electrolytic oxidation (PEO) process was employed to create ceramic coatings on
titanium substrate by using silicate-based electrolytes containing different concentrations of …
titanium substrate by using silicate-based electrolytes containing different concentrations of …
[HTML][HTML] Assessing the wear properties of plasma electrolytic oxidation TiO2 coatings incorporated ZrO2 nanoparticles on Cp-Ti in simulated body fluid
M Molaei, A Fattah-alhosseini, M Nouri… - Applied Surface Science …, 2024 - Elsevier
TiO 2 oxide coatings incorporated ZrO 2 nanoparticles were prepared on Cp-Ti using the
plasma electrolytic oxidation (PEO) process in electrolyte solutions containing dispersed ZrO …
plasma electrolytic oxidation (PEO) process in electrolyte solutions containing dispersed ZrO …
In vitro tribological behavior and corrosion resistance of SiO2/TiO2/ZrO2 coatings formed on the tantalum substrate using plasma electrolytic oxidation for orthopedic …
A Ahangari, A Mokhtarzade, M Mahmoodi - Materials Chemistry and …, 2023 - Elsevier
Tantalum (Ta) is widely used in orthopedic and dental implants due to its remarkable
stability, biocompatibility, and mechanical properties. However, in physiological …
stability, biocompatibility, and mechanical properties. However, in physiological …
相关搜索
- antibacterial effect peo coatings
- antibacterial effect corrosion behavior
- corrosion behavior peo coatings
- antibacterial effect microstructural analysis
- corrosion behavior titanium substrate
- microstructural analysis peo coatings
- zro2 nanoparticles tio2 coatings
- zro2 nanoparticles incorporation of zno
- corrosion behavior microstructural analysis
- tio2 coatings incorporation of zno
- peo coating nano particle
- zro2 nanoparticles sbf solution
- tio2 coatings sbf solution
- antibacterial properties tio2 nanoparticles
- zro2 nanoparticles corrosion resistance
- sbf solution incorporation of zno