ABSTRACT A series of blends of Acrylonitrile-Butadiene-Styrene (ABS) and Polycarbonate
(PC) were prepared and some of their thermal and mechanical properties were determined …

Blends of polycarbonate (PC) with acrylonitrile butadiene-styrene (ABS), containing 20 and
30% polybutadiene (PB) respectively, were produced and compared at equal levels of …

Blends of polycarbonate/acrylonitrile–butadiene–styrene terpolymer (PC/ABS) and
polycarbonate/maleic anhydride grafted ABS (PC/MABS) were prepared over the whole …

Blends of polycarbonate (PC) and poly (acrylonitrile‐co‐butadiene‐co‐styrene)(ABS) with
different compositions are characterized by means of dynamic mechanical measurements …

The morphology and the mechanical properties of polycarbonate (PC) blends with different
acrylonitrile–butadiene–styrene (ABS) materials were investigated. PC/ABS blends based …

To help make a good polymer blend by melt blending, the properties of polycarbonate
(PC)/acrylonitrile‐butadiene‐styrene (ABS) systems with various compositions have been …

Polypropylene/polyisobutylene (PP/PIB) blends were prepared in the entire composition
range in an internal mixer. The miscibility of the components was estimated by various …

A commercial polycarbonate (PC)/acrylonitrile‐butadiene‐styrene (ABS) blend was
reprocessed by injection molding to study the influence of reprocessing on the physical …

The phase morphology of PC/ABS blends can be significantly affected by its processing
conditions. Blends prepared in a mixing chamber at different conditions show a strong …

The relationships between morphology and mechanical properties in polyamide 6/bisphenol‐
A polycarbonate blends have been investigated by means of Scanning Electron Microscopy …