Electrochemical assessment on the corrosion risk of steel embedment in OPC concrete depending on the corrosion detection techniques

JS Reou, KY Ann - Materials Chemistry and Physics, 2009 - Elsevier
This study examines the corrosion of embedded steels in concrete or mortar using galvanic
cell, half-cell, polarisation technique and mass loss method. The chloride content in the cast …

[HTML][HTML] Analysis of the effect of protective properties of concretes with similar composition on the corrosion rate of reinforcing steel induced by chloride ions

Z Szweda, J Kuziak, L Sozańska-Jędrasik, D Czachura - Materials, 2023 - mdpi.com
This study presents a comparison of the protective properties of three concretes of similar
composition on the effect of chloride ions. To determine these properties, the values of the …

Characterization of corrosion behaviors of steel in concrete by time and frequency domain electrochemical methods

J Shi, W Sun, J Ming - Procedia Engineering, 2012 - Elsevier
Corrosion behaviors of the steel embedded in ordinary Portland concrete (OPC) and high
performance concrete (HPC) specimens, before and after the exposure to NaCl solution for …

Electrochemical behavior of corroded and protected construction steel in cement extract

DA Koleva - Materials and Corrosion, 2011 - Wiley Online Library
The corrosion behavior of corroded, cathodically protected and control (reference)
construction steel, previously embedded in concrete, was studied in cement extract (pH …

[PDF][PDF] Effect of Al2O3 additives on the corrosion and electrochemical behavior of steel embedded in ordinary Portland cement concrete

MM Sadawy - Am. J. Mater. Res, 2014 - academia.edu
The effect of Al2O3 addition on the corrosion and electrochemical behavior of steel
imbedded in ordinary Portland cement concrete was investigated using weight loss method …

Influence of pre-rusting on steel corrosion in concrete

P Novak, R Mala, L Joska - Cement and concrete research, 2001 - Elsevier
Steel specimens in three different superficial states (machined, scaled, and pre-rusted) were
embedded in concrete blocks (OPC) with various chloride contents (0.0, 0.4, and 2.5 …

Comparing corrosion measurement methods to assess the corrosion activity of laboratory OPC and HPC concrete specimens

HR Soleymani, ME Ismail - Cement and concrete research, 2004 - Elsevier
The corrosion of reinforcing steels in concrete is the main reason for the deterioration of
bridge decks. An accurate method for measuring corrosion is a fundamental prerequisite for …

Electrical resistance changes as an alternate method for monitoring the corrosion of steel in concrete and mortar

PA Cella, SR Taylor - Corrosion, 2000 - onepetro.org
ABSTRACT A very sensitive, unambiguous, and simple procedure was introduced for the
assessment of corrosion in concrete. This method consists of making resistance change …

The electrochemical behaviour of steel in concrete and how to evaluate the corrosion rate

K Vjdern, R Myrdal - NACE CORROSION, 1996 - onepetro.org
Various electrochemical methods for evaluation of corrosion of steel reinforcement in
concrete have been studied and reviewed regarding applicability in the field. Laboratory …

[HTML][HTML] A two-year evaluation of corrosion-induced damage to hot galvanized reinforcing steel b500sp in chloride contaminated concrete

M Jaśniok, M Sozańska, J Kołodziej, B Chmiela - Materials, 2020 - mdpi.com
Corrosion-induced damage to concrete reinforced with bars is a serious problem regarding
technical and economic aspects and strongly depends on used materials, corrosion …