Thiophene, benzothiophene, and dibenzothiophene were extracted from isooctane using
water and aqueous solutions of hydrochloric acid, sulfuric acid, nitric acid, acetic acid …

The thiophene extraction from model fuel by using N-methyl-2-pyrrolidone [NMP],
dimethylformamide [DMF] and ethylene glycol [EG] as solvents had been carried out at …

Removal of sulfur species from fuels is an increasingly critical environmental issue.
Hydrodesulfurization (HDS) removes sulfur compounds, such as mercaptans and sulfides …

Thiophenic sulfur removal was attempted in three different modes of operation, such as
extraction, oxidation and simultaneous oxidation–extraction for a model fuel. Extraction was …

Thiophenes are the major sulfur compounds contained in transportation fuels, and the
removal of thiophenes dictates the degree of deep desulfurization of fuels. A new …

Benzothiophene, Dibenzothiophene (DBT), 4-methyldibenzothiophene, and 4, 6-
dimethyldibenzothiophene are typical thiophenic compounds prevailing in diesel fuels …

In this work the possibility of use glycols in extractive desulfurization will be discussed based
on liquid–liquid phase equilibria (LLE) measurements for {glycol (1)+ aromatic sulfur …

Desulfurization of gasoline and diesel models is investigated through liquid–liquid extraction
of thiophene (C4H4S) from n-paraffin compounds. Ionic solvents of 4-methyl-N …

Today there are serious regulations to reduce sulfur content of fuels because the SO x
produced during the combustion of fuels containing sulfur compounds make the air polluted …

In this work, extractive desulfurization of model fuel containing dibenzothiophene (DBT) and
thiophene (Th) as sulfur compounds was carried out using 16 different Deep Eutectic …