… angle measurements to the dimensions of the sessile drop as θ* → 180 in terms of a
dimensionless Bond number (Bo) defined using the maximum drop … of an axisymmetric sessile …

… for the measurement of contact angles, but the use of a sessile drop … the formation
ofaxisymmetric sessile drops; only small … determining contact angles from sessile drops is with …

… angles are simultaneously measured at every point of the three-phase line boundary of the
sessile drop … method to the measurement of advancing contact angles of simple hydrocarbon …

… The contact angle also characterizes the biological compatibility of different surfaces (2, 3). …
contact angles with sessile drops is the goniometric technique. A tangent to the drop surface …

… (c) Typical size of a sessile drop used in measurements of advancing and receding … to the
sessile drop during contact angle measurements. 4.1 Advancing contact angle measurements …

… conditions of the measurement of CA by the sessile drop method. The … the sessile drop, the
time after deposition and the cleanliness of the surface on the results of CA measurement on …

… Sessile drop contact angle measurements using ADSA-P were … the sessile drop from below
the surface. In this study, at least 5 and up to 10 dynamics contact angle measurements were …

… as a means of measuring sessile-drop contact angles. The success of all drop shape techniques
… to measure the contact angle of a sessile drop by fitting linear, quadratic and cubic poly- …

… series of measurements of drop mass and radius, first after the placement of a sessile drop,
then after each addition of liquid to the drop, and after each removal of liquid from the drop by …

… uncertainties associated with direct measurement of the contact angle from the drop image.
Indeed, when the volume and height of a sessile drop are measured accurately, the method …