… shell structures of microPCMs. Thus, this study has demonstrated that the shell structures of
microPCMs can be controlled by structural formation process, including shell material speed …

… for MF shell and MMF shell microPCMs. Figure 6 yield point values for MF shell with core/shell …
Pa, and MMF shell with core/shell ratios of 3/1, 2/1, 1/1, and 1/2 are 0.70, 0.97, 1.12, and …

… In this study, MMF-shell microPCMs containing dodecanol were successfully synthesized
by in situ polymerization, and a series of microPCMs/epoxy composites were fabricated to …

… In this study, a series of MMF shell microPCMs containing paraffin were successfully synthesized
by in situ polymerization. A thermal transmission process investigated interface stability …

… Melamine-formaldehyde (MF) resin is often applied as shell material for microencapsulated
phase change materials (MicroPCMs) … Therefore, modification of formaldehyde-based shells …

… and urea-formaldehyde and melamine-formaldehyde (MF) 12–14 … formaldehyde unavoidably
exists after forming the MF shell … However, microPCMs with low free formaldehyde content …

… , a series of the micro-PCMs with good … melamine–formaldehyde as shell material. And the
aim of this study is to develop the fabrication of the modified melamine–formaldehyde shell of …

… crystallization of n-octadecane, ∆ H m , microPCMs represents the enthalpy of melting of
the sample, and ∆ H c , microPCMs represents the enthalpy of crystallization of the sample. By …

… The synthesis of the microPCMs using PMF resin as shells is usually carried out by in situ
polymerization in an oil-in-water emulsion stabilized by nonionic or anionic emulsifiers [34], [35…

… -shell microPCMs/epoxy composites had a better interface stability than MF-shell microPCMs…
Mechanical properties also indicated that the MMF-shell microPCMs/epoxy composites had …