… simultaneously improve yield strength (YS), ultimate tensile strength (UTS) and elongation
(EL) of laser melting deposited (LMDed) Ti-6Al-4V titanium alloy. … in the improvement of the EL …

… In the present work, two-pass friction stir welding of Al alloy to Ti alloy was successfully
carried out. The effect of second pass on the formation of Ti particles, microstructural evolution …

… improvement due to the strong solution strengthening from Mo with high concentration [43]. …
and effective way to improve the mechanical properties of Ti-alloys based on the design of …

… pure titanium (CP-Ti), Ti-6Al-4 V ELI and Ti-5Al-2.5Sn alloys … , most Ti-alloys exhibit higher
strength but few titanium alloys … In addition, the strain-hardening capabilities of most Ti-alloys …

… the nano-oxide dispersion-strengthened Mo alloy [27]. They reported that … in improving the
strain hardening rate. With an increased proportion of IG particles, simultaneous improvement …

… The fabrication of bioactive oxide layers on Ti–6Al–4V alloy by combining of wet and dry …
of titanium oxide obtained by wet plasma electrolytic oxidation of Ti–6Al–4V alloy substrate. Zn …

… alloy is the key to simultaneously improve the strength and ductility. In order to obtain desired
mechanical properties of Ti6Al4V alloy, the … results showed simultaneous improvement of …

… titanium alloy, Ti-5Al-5Mo-5V-3Cr-1Zr (Ti-55531, in weight percent), which is a high-strength
titanium alloy … to designing heterostructured alloy results in a notably improved strength and …

… of alloy are still unclear now. Detailed works are needed to illustrate how to use intermediate
… transformation to simultaneously improve the strength and ductility of near β Ti alloy, as well …

… a simultaneous improvement in the ultimate tensile strength (UTS) and uniform elongation
(UE) of Ti-… to the simultaneous improvement of the strength and plasticity (SISP) of the Ti2448 …