… steel (S17-4 PH) powder, used in laser-based PBF process, on the mechanical properties of
built parts and powder … S17-4 PH is a martensitic precipitation-age-hardening stainless steel …

… process and dependency on time consuming post process treatments. The selection of L-PBF
process … -PBF process parameter optimization for fabrication of 316L steel components for …

… the capability of laser powder bed fusion (L-PBF) systems to process stainless steel alloys is
… analyzing the listed tensile properties for 316L stainless steel powders, we can state that the …

… in the surrounding powder-bed compromising its reusability. In this study, AISI 304 L … steel
powder is subjected to seven reuses in the L-PBF process to assess the changes in powder …

… , limited feedstock materials, manual post-processing and etc. Continued efforts have been
… of steels and iron-based alloys used in LPBF process by summarizing their key process …

… In this work, we present a systematic study of 316L powder properties from the virgin
state through thirty powder reuses in the laser powder bed fusion process. Thirteen powder …

… This work investigated the processing of high nitrogen-alloyed austenitic stainless steels by
laser powder bed fusion (L-PBF). Prior to L-PBF processing, the AISI 316 L steel powder was …

… Revolution Powder Analyzer was used to quantify powder … and spheroidized powders using
laser powder bed fusion process … parts with plasma spheroidized powder have lower tensile …

… gas-atomization process. In this work, gas- and water-atomized 304L stainless steel powders
were … The water-atomized powder had a wider particle size distribution and exhibited less …

… steel component fabricated in the LPBF process. In this paper, an attempt has been made to
… the effect of the laser process parameters with the maraging steel 300 in the LPBF process. …