… layer with strong corrosion resistance on Ti-5Cu-O sample. It can be … of Ti-O and Ti-5Cu-O
samples were significantly increased compared with Ti and Ti-5Cu samples, especially Ti-5Cu-…

… No cytotoxicity was found on Ti-5Cu alloys and the anodized Ti-5Cu alloys but the treatment
accelerated the cell adhesion. It was suggested that anodization treatment might be a …

… high purity titanium (99.9%). More details were described in our previous work [25]. Ti-5Cu …
were cut from the Ti-5Cu alloy bar and the commercial pure titanium (cp-Ti) disks were served …

… has been focused on titanium dioxide (TiO 2 ) thin … Titanium dioxide is especially used in
dye-sensitized solar cells, where dye is the active material that produces electrons and titanium (…

… sputtering equipment (JGP560I) using Ti metallic targets. During the sputtering, reactive …
Cu2O and Cu-Cu2O films were deposited on TiO2 films to form Cu2O/TiO2 and Cu-Cu2O/TiO2 …

… within the bandgap of TiO2 associated with Ti defects, specifically the intra-bandgap Ti
states (Tids). Firstly, the fate of photogenerated electron and holes in TiO2 are described with …

… The spectrum of the Ti 2p region presented in Fig. 2(b) shows … Ti 2p 3/2 and Ti 2p 1/2 ,
respectively. These observations confirm the existence of Ti +4 type of chemical states of titanium …

… , the Ti coatings are totally oxidized and formed into TiO2 microstructure. In summary, Cu2O
(CuO)/TiO2/Ti-TiO2 … Against that, CuO (Cu2O)/TiO2 composite microstructure is formed in the …

… Titanium dioxide commercial powder (TiO 2 , P-25, 99.9%-Merck) was purchased from
Degussa to synthesize the titanium dioxide nanotubes (TNTs). Analytical reagent sodium …

… (d) STEM-ADF and STEM-EELS analysis of the 1% Cu2O/TiO2 … ) and Ti L-edge at 456
eV (blue). (e) High resolution XPS spectra for the Ti 2p core level of TiO2 and 1%, 2% Cu2O/TiO2 …