… Elastic–plastic analysis of the peel test In this section, the results of a cohesive-zone
analysis for an elastic–plastic peel test are presented. The film was modeled using 2D plane-strain …

… The 90 peel tests studied in this paper relates the measured pull force (F pull ) per width (W)
of peel arm to a corresponding energy release rate of \({F}_{pull}(1-\,\cos \,\theta )/W\), as …

… peel angle during a T-peel test. Hence, this study developed a new T-peel test apparatus for
flexible … to solve the variation and stability problem of the peel angle during peel testing. This …

… In the present work, peel tests were performed using … study was performed, from which
it was determined that the minimum element size needed was 50μm. A parametric study was …

… This paper reviews the different peel tests available as well … of peel angle, different types
of peel tests such as 90º and T-… 12 and a summary of parametric study are shown in Table 3. …

… The effects of reverse plasticity are taken into account in our analysis and the configuration
of a steady state peel test together with the corresponding moment-curvature diagram are …

… and performing peel tests with patches at multiple peel angles, … focuses on testing and
modeling the peel test at different … A parametric study was performed to investigate the effect of …

… However, their parametric analysis of the peel test focuses on … research streams, namely
those which focus on the peel test … model takes advantage of previous research in the fields of …

… modelled the peel test but the majority of these have focused on peel tests which consist of
… , a third parameter was also required, namely the initial stiffness, k. A parametric study was …

… study that connects the test method used for measurement is always missing. In this paper,
a case of T-peel test … variability and optimization of T-peel test when measuring the strength, …