This paper describes a simple photo-voltaic (PV) tracking system which has been designed and manufactured using a pyramidal stand as a base. A rotating unit consisting of two pairs of modules fixed at an angle of 170° between them was installed at the upper edge of the stand. The four modules and a DC motor were connected to a bridge circuit making the system sensitive to solar tracking. The PV tracker has a DC–DC (24/2V) converter, DC–AC (24/220V) inverter and a battery. The modules are able to provide a maximum power of ∼100W, which feeds the converter, inverter and DC motor. Wind resistance of the tracker is quite low. The total area of the four modules is 1.26m². The inclination angle between the modules and the horizontal plane is adjustable (34°±11°) and the tracking angle is 120°. The system can track solar motion with an error of ±10°. The designed PV tracking system, with modules fixed at an angle of 170° to feed the load as well as the DC motor, exhibited it to be an efficient energy-conversion system. The fabricated system offers low wind resistance. The cost analysis data revealed that the proposed design was very economical and cost effective.