Anaerobic digestion of grape pomace: Biochemical characterization of the fractions and methane production in batch and continuous digesters
Waste Management, 2016•Elsevier
In this study, we have estimated the biogas and methane production from grape pomace
(variety Cabernet Franc). The physical and chemical characteristics of the raw material were
determined, and the structural polysaccharides were identified and analyzed by the Van
Soest method. Batch anaerobic digestions were carried out to assess the methane
production of the grape pomace, pulp and seeds. The obtained cumulative methane
productions are 0.125, 0.165 and 0.052 Nm 3 kg COD− 1 for grape pomace, pulps and …
(variety Cabernet Franc). The physical and chemical characteristics of the raw material were
determined, and the structural polysaccharides were identified and analyzed by the Van
Soest method. Batch anaerobic digestions were carried out to assess the methane
production of the grape pomace, pulp and seeds. The obtained cumulative methane
productions are 0.125, 0.165 and 0.052 Nm 3 kg COD− 1 for grape pomace, pulps and …
Abstract
In this study, we have estimated the biogas and methane production from grape pomace (variety Cabernet Franc). The physical and chemical characteristics of the raw material were determined, and the structural polysaccharides were identified and analyzed by the Van Soest method. Batch anaerobic digestions were carried out to assess the methane production of the grape pomace, pulp and seeds. The obtained cumulative methane productions are 0.125, 0.165 and 0.052 Nm3 kg COD−1 for grape pomace, pulps and seeds, respectively. The effect of grinding on the methane potential of the substrates, as a mechanical pretreatment, was evaluated. We found that it increased the anaerobic biodegradability for grape pomace, pulp and seeds by 13.1%, 4.8% and 22.2%, respectively. On the other hand, the methane potential of the grape pomace was determined in a laboratory pilot plant (12 L) continuously mixed with an organic loading rate of 2.5 kg COD m3 d−1 and a hydraulic retention time of 30 days. The corresponding biogas production was 6.43 × 10−3 Nm3 d−1, with a methane content of 62.3%. Thus, the pilot plant’s efficiency compared to that achieved in the batch process was 81.2%. Finally, a significant correlation was found between the biochemical content and methane production.
Elsevier
以上显示的是最相近的搜索结果。 查看全部搜索结果