… microstructure and quasi-static mechanical behavior of the direct metal laser sintered Inconel
… The printed material was further processed by annealing and double-aging, hot isostatic …

… of several heat treatments on the microstructure and mechanical properties of Ti-6Al-4V
processed by SLM. It reports the achievable mechanical properties of the alloy, including quasi-…

… and stainless steel CX using Direct Metal Laser Sintering has been … -stainless steel CX are
investigated for the first time in the … mechanical and microstructural characteristics of stainless …

… selective laser melting: Microstructure and mechanical properties”, … integrity of direct metal
laser sintered parts subjected to … on microstructure and mechanical property of selective laser …

… present a thorough analysis of direct metal laser sintering process, process parameters,
sintering … ) and compared its crystallization and mechanical properties. This study found that the …

… The objective of this study is to fully characterize the microstructure and mechanical
properties of AlSi10Mg aluminium alloy cellular lattice structures made by DMLS. The periodic …

… present work deals with an experimental characterization of an AlSiMg alloy starting from …
to the estimation of the mechanical properties of parts produced with a DMLS machine in four …

… The microstructure and mechanical properties are studied. Additive manufactured components
showed enhanced performance as compared to forging and casting in room temperature …

… There were minimal differences in the microstructure and mechanical properties when heat
treated in air or vacuum, at 800C. Heat treatment at 1100C was feasible in vacuum but not in …

… analysis study was made to evaluate the inner pore structure, thereby to understand the
mechanical behavior… in horizontal direction using direct metal laser sintering powder bed …