… the OLEDs patterned using spray-coated and screen-printed … dielectric layer can be deposited
prior to the OLED layers to … of the printed dielectric in devices with thin aluminum. For Sc-…

… layer beneath the OLED devices, leaving virtually the entire … Our current focus is the
patterning of vapor-deposited … the fabrication of devices based on multiple patterned layers (…

… the methodology of micro-OLED fabrication for fine displays is still in its … depositing Alq 3 and
LiF/Al layers on the patterned NPB … Thus, a micro-OLED array was achieved with the device …

… reference device (black squares); a schematic of the OLED … Finally, OLEDs are deposited
on top of the pre-patterned … stack used in this work consists of a hole transport layer (60 nm…

… devices where the light escapes from the last deposited layer38, 39 (top emission). The
top-emitting OLED … without any need to be patterned. Two or more luminescent materials are …

… Organic light emitting devices (OLEDs) are light emitting devices … deposition of red, green
and blue materials through a pre-… device consists of heterojunction of two thin layers of OLED …

… was measured for 20 nm layer at the deposition rate of 0.7 Å s … deposition condition of Zn
(1.8 Å s −1 ), the fabricated device … deposition temperature, we identified the proper deposition …

… devices and their working principles, materials, deposition … device (EL), the organic light
emitting diode (OLED) and the light … out of thin layers that can be directly printed or coated on …

… of both methods to make transparent OLED displays, ie, securing transmittance … deposited
Mg:Ag until reaching 12 nm. Lastly, we deposited MoO 3 as a capping layer to improve device …

… Being based on lightemitting devices, OLED panels are likely to be cheaper, simpler and …
OLED devices and cathode layers were then deposited on the patterned ITO/PET substrates in …