Improving The Production of Self-Assembled ZnS: Mn Nanocrystals Through The Modification of Sol Gel–Spin Coating Approaches

AAMA Noor, S Shaari… - Advanced Materials …, 2014 - Trans Tech Publ
AAMA Noor, S Shaari, SAR Mohammad
Advanced Materials Research, 2014Trans Tech Publ
It is difficult to produce a good film consisted of nanocrystals with good alignment. So far, a
lot of methods and especially expensive vacuum-based methods have been used to
produce such films. In this paper, sol gel and spin coating method were introduced. The
combination of these simple and cheaper methods was used because of the high potential
of those methods to produce good quality nanocrystals. First, nanocrystals were produced
by sol gel method and later spin coating was done to control the thickness of the …
It is difficult to produce a good film consisted of nanocrystals with good alignment. So far, a lot of methods and especially expensive vacuum-based methods have been used to produce such films. In this paper, sol gel and spin coating method were introduced. The combination of these simple and cheaper methods was used because of the high potential of those methods to produce good quality nanocrystals. First, nanocrystals were produced by sol gel method and later spin coating was done to control the thickness of the nanocrystals film. During the spin coating process, a metal tape was used to avoid solution from splashing out from the glass substrate. Subsequently, nanocrystals film was heated up from room temperature to 400 °C. To study the alignment of nanocrystals, Field Emission Scanning Electron Microscopy (FE-SEM) was used. Through this analysis, we found that the nanocrystals was in spherical pattern and the alignment of this film was well arrayed. Here, the combination of the two cheaper and simpler methods can be used to produce good quality of nanocrystals thin film and at the same time can save our research cost.
Scientific.Net
以上显示的是最相近的搜索结果。 查看全部搜索结果