This study is carried out to focus on optimisation of process parameters by simulation using
Autodesk Moldflow Insight (AMI) software. The process parameters are taken as the input in
order to analyse the warpage value which is the output in this study. There are some
significant parameters that have been used which are melt temperature, mould temperature,
packing pressure, and cooling time. A plastic part made of Polypropylene (PP) has been
selected as the study part. Optimisation of process parameters is applied in Design Expert …

This study conducts the simulation on optimisation of injection moulding process parameters
using Autodesk Moldflow Insight (AMI) software. This study has applied some process
parameters which are melt temperature, mould temperature, packing pressure, and cooling
time in order to analyse the warpage value of the part. Besides, a part has been selected to
be studied which made of Polypropylene (PP). The combination of the process parameters
is analysed using Analysis of Variance (ANOVA) and the optimised value is obtained using …