In this research article, natural fibre Jute & Man-made fibre glass are reinforced with polypropylene and epoxy resin for manufacturing of compression moulding composites at three different fibre volume fraction (10, 20 and 30%). The mechanical properties of both fibres composites were tested and compared. The maximum stress at break and flexural strength for glass fibre reinforced composite found high for 30% fibre volume fraction. The epoxy composite displayed higher tensile strength, flexural strength and impact strength than polypropylene composite for both jute and glass fibre reinforced polypropylene composites. Elongation at break and flexural modulus of jute and glass fibre reinforced polypropylene and epoxy composite showed low significant difference.