Ultimate load-carrying ability of rib-stiffened 2024-T3 and 7075-T6 aluminium alloy panels under axial compression
Stringer-stiffened panels made of aluminium alloys are often used as structural elements in
the aircraft industry. The load-carrying capacity of this type of structure cannot relieve the
reduction in strength in the event of local buckling. In this paper, a method of fabrication of
rib-stiffened panels made of EN AW-2024-T3 Alclad and EN AW-7075-T6 Alclad has been
proposed using single point incremental forming. Panels made of sheets of different
thickness and with different values of forming parameters were tested under the axial …
the aircraft industry. The load-carrying capacity of this type of structure cannot relieve the
reduction in strength in the event of local buckling. In this paper, a method of fabrication of
rib-stiffened panels made of EN AW-2024-T3 Alclad and EN AW-7075-T6 Alclad has been
proposed using single point incremental forming. Panels made of sheets of different
thickness and with different values of forming parameters were tested under the axial …
[PDF][PDF] Ultimate Load-Carrying Ability of Rib-Stiffened 2024-T3 and 7075-T6 Aluminium Alloy Panels under Axial Compression. Materials 2021, 14, 1176
Stringer-stiffened panels made of aluminium alloys are often used as structural elements in
the aircraft industry. The load-carrying capacity of this type of structure cannot relieve the
reduction in strength in the event of local buckling. In this paper, a method of fabrication of
rib-stiffened panels made of EN AW-2024-T3 Alclad and EN AW-7075-T6 Alclad has been
proposed using single point incremental forming. Panels made of sheets of different
thickness and with different values of forming parameters were tested under the axial …
the aircraft industry. The load-carrying capacity of this type of structure cannot relieve the
reduction in strength in the event of local buckling. In this paper, a method of fabrication of
rib-stiffened panels made of EN AW-2024-T3 Alclad and EN AW-7075-T6 Alclad has been
proposed using single point incremental forming. Panels made of sheets of different
thickness and with different values of forming parameters were tested under the axial …
以上显示的是最相近的搜索结果。 查看全部搜索结果