With the increased use of fiber-reinforced composites (FRPs), the design of a new
generation of composite structures with high stiffness and a ductile material behavior is …

This article deals with the effects of stabilising overfeed (SOF) on the physical properties and
structure of draw-texturised polyester yarn. Partially oriented (POY) polyester filament yarn is …

The aim of this study is to evaluate many parameters in intermingling process and to
determine the effects of these parameters on yarn properties statistically. For this purpose …

The purpose of this study is to determine the effect of draw texturing of polyester yarn on
various structural, mechanical, and physical characteristics of plain woven fabric. Partially …

Air-jet texturing of conventional poly (ethylene terephthalate)(PET) yarns, having the same
chemical structure with high modulus and tenacity PET yarns, are studied in order to …

Bu çalışmada teknik polyester ipliklerin, kopma mukavemetlerinde önemli bir azalmaya yol
açmadan hava-jetli tekstüre edilmeleri incelenmiştir. Çalışmada kullanılan aşırı besleme …

Physical properties of the composite yarn using low-melting (LM) polyester/Tencel were
investigated with air-jet texturing conditions such as temperature, take-up overfeed, yarn …

Delamination is the most common failure mode in laminated composites, due to the reduced
strength in the through-the-thickness direction. This paper describes the development of …

Determination of the instability of air-jet textured yarns is a very important aspect of their
quality characterization. To overcome this problem many researchers have suggested …

The tensile properties of air-entangled textured polyester single and multiple yarn ends
before and after weaving were analyzed. The effects of weaving process considering fabric …