This study evaluated the design properties of the geosynthetic reinforced soils for the
roadway pavement and compared the reinforcing performance depending on different …

In the present paper a series of California Bearing Ratio (CBR) tests has been performed in
both soaked and unsoaked condition on field samples collected from road subgrade. Four …

It is of interest, for a developing country like India, to use natural and low-cost reinforcement
material in rural roads. Bamboo is a locally and cheaply available alternative as a …

Abstract Effects of stroke frequency, depth of needle penetration and mass per unit area on
properties of needle-punched nonwoven fabrics produced from polypropylene (PP), 50/50 …

A rural road section reinforced with Jute Geotextiles (JGT) sandwiched between thin sand
layers has been constructed to study the strength improvement of subgrade soil. In this …

Abstract A 3D finite element (FE) analysis has been carried out to propose a design chart for
Sand-Jute geotextiles-Sand (SJS) reinforced low volume road section on soft subgrade …

woven geotextiles have been extensively used in civil engineering applications. This
chapter discusses the selection of fibres, most common production methods and the …

Many past research works proved the successful usage of synthetic geotextiles and
geogrids as road subgrade reinforcement. However, reinforcing subgrades with natural …

In the present study, a 3D finite element (FE) analysis has been carried out to study the
stress and strain response of Jute Geotextiles (JGT) reinforced rural road by static analysis …

The present research conducted tests to evaluate the reinforcing performance of
geosynthetics including three geogrids (GG1, GG2, and GG3) and one geotextile (GT) for …