Combustion chamber modifications to improve diesel engine performance and reduce emissions: A review
The concept of combustion chamber modifications of diesel engines has been attracting
much attention in the field of engine research. Many researchers are investigating modified …
much attention in the field of engine research. Many researchers are investigating modified …
Optimization of a 30 kW SOFC combined heat and power system with different cycles and hydrocarbon fuels
Solid oxide fuel cells (SOFCs) could generate power cleanly and efficiently by using a wide
range of fuels. Through the recovery and utilization of the energy in the SOFC tail gas, SOFC …
range of fuels. Through the recovery and utilization of the energy in the SOFC tail gas, SOFC …
On Powell-Eyring hybridity nanofluidic flow based Carboxy-Methyl-Cellulose (CMC) with solar thermal radiation: A quadratic regression estimation
Examining the thorough double-hybrid nanofluid mode Yamada-Ota and Xue provide a
detailed description of the Powell-Eyring fluid model (PEFM) with the grouping of the base …
detailed description of the Powell-Eyring fluid model (PEFM) with the grouping of the base …
Effect of multiple bluff bodies on hydrogen/air combustion characteristics and thermal properties in micro combustor
Y Zhang, Q Lu, B Fan, L Long, EK Quaye… - International Journal of …, 2023 - Elsevier
The bluff body is commonly used to improve micro combustion. The micro combustor with
multiple rectangular bluff bodies in a single row was proposed. The effects of bluff bodies on …
multiple rectangular bluff bodies in a single row was proposed. The effects of bluff bodies on …
Experimental and numerical investigation on premixed H2/C3H8/air combustion and thermal performance in a burner with partially filled porous media
Micro combustion is challenged by small size, high area-volume ratio and heat loss ratio,
affecting the flame stability and energy efficiency. Premixed H 2/air combustion with C 3 H 8 …
affecting the flame stability and energy efficiency. Premixed H 2/air combustion with C 3 H 8 …
Efficient lean combustion in a novel porous medium burner with the integrated of pellets and ceramic foam: Experimental study of flame propagation and stability
H Dai, H Dai - Combustion and Flame, 2022 - Elsevier
Porous medium combustion makes an important contribution to energy saving and emission
reduction, and the porous structure significantly affects the combustion characteristics. To …
reduction, and the porous structure significantly affects the combustion characteristics. To …
Improved design of heat sink including porous pin fins with different arrangements: A numerical turbulent flow and heat transfer study
Recently, there exist rapid advancements in different parts of some devices that produce
significant heat. Active or passive methods, in different ways, can be used to cool down and …
significant heat. Active or passive methods, in different ways, can be used to cool down and …
Pore-scale analysis of two-phase nanofluid flow and heat transfer in open-cell metal foams considering Brownian motion
Simultaneous use of porous media and nanofluids will increase the convective heat transfer
multiple times compared to non-porous and pure fluid conditions. Heat transfer and flow …
multiple times compared to non-porous and pure fluid conditions. Heat transfer and flow …
Effect of intake method on ammonia/oxygen non-premixed combustion in the micro combustor with dual-inlet
Y Zhang, Q Lu, B Fan, EK Quaye, J Weng, S Xiao… - Fuel, 2022 - Elsevier
MTPV systems have received extensive attention due to their high energy density, direct
energy conversion, and small size. To prevent the possibility of flashback, non-premixed …
energy conversion, and small size. To prevent the possibility of flashback, non-premixed …
Effects of channel height on the combustion efficiency and thermal performances of a micro Swiss-roll combustor
S Wang, J Li, A Fan - Applied Thermal Engineering, 2024 - Elsevier
Micro combustors can be used as the heat sources for micro power generation systems.
Recently, we developed a micro Swiss-roll combustor for non-premixed fuel and air. In the …
Recently, we developed a micro Swiss-roll combustor for non-premixed fuel and air. In the …