Disintegrated carbonaceous mudstone (DCM) is a fine grain with soil-like properties
produced by disintegrating carbonaceous mudstone. Notably, DCM further disintegrates and …

As the byproduct in fluoride production, fluorogypsum is of slow hydration and poor
concreting, playing a role of threat to environmental safety. Microstructure and performances …

The use of waste materials in soil stabilization is very important in terms of recycling of waste
materials and reducing environmental pollution. The aim of this study is to investigate the …

Using Portland cement for soil solidification has sustainability issues due to high energy-
consumption and carbon emissions. An innovative approach suggests using titanium slag …

This study aimed to determine the effect of circulating fluidised bed bottom ash (CFB-BA)
content on the mechanical properties and drying shrinkage of cement-stabilised soil …

Thermodynamic modeling helps to reveal insights into the basic chemical kinetics of
dissolution and precipitation in cementitious materials, but relevant applications to cement …

In this research, Poly-Naphthalene Sulphonate (PNS) properties and working in concrete
are enhanced to get the required workability and high strength of 10000psi. PNS usually …

Silt and mucky soil have high natural moisture content, poor water permeability, high
compressibility, low strength, and a large void ratio. Silt and mucky soil solidify by adding …

Iron oxide nanoparticles (IOXn) are unstable in aqueous solutions, which prevents their use
in various applications. Because of this, it was proposed to treat the IOXn surface by …

Mechanical properties of epoxy resin mortar with different proportions were tested based on
orthogonal method. The influences of each factor on the compressive strength, flexural …