Magnesium (Mg) and its alloys have attracted attention as biodegradable materials for
biomedical applications owing to their mechanical properties being comparable to that of …

Osteoconductive, biocompatible, and biodegradable magnesium alloys hold great promise
as novel materials for orthopaedic and vascular implants due to their bone-like mechanical …

Abstract A Nb 2 O 5/Mg gradient coating was synthesized on AZ31 magnesium alloy through
the magnetron sputtering technique. The microstructure and properties of the coating were …

The Magnetron sputtering method was utilized to apply tantalum-oxide coatings on NiTi
shape memory alloys, and this was done under 16.6 vol% oxygen, 83.4 vol% argon …

This study aims to create mathematical models (MMs) and maps that will facilitate
personalized implant design and provide the selection of design parameters that give …

In this work, surface morphology, corrosion resistance, and mechanical properties of
tantalum sputtered NiTi in Ar and Ar–N 2 atmospheres as well as room and 200° C …

Dye waste management via renewable stratagem as well as understanding the nature of
degraded products are highly essential for controlling the water purification process …

A nano-featured tantalum coatings with an average thickness of 800 nm and grain size of 50
nm were successfully prepared by Selective Electron Beam Melted (SEBM) Ti6Al4V …

The magnetron sputtering method was used to deposit tantalum-containing coatings on NiTi
shape memory alloys under Ar, Arsingle bondO 2, and Arsingle bondN 2 atmospheres. The …

Magnesium alloys have been considered as temporary biomaterials for orthopedic
applications. Despite having great mechanical (bone-like) characteristics and …