The lateral photovoltaic effect (LPE) can be used in position-sensitive detectors to detect
very small displacements due to its output of lateral photovoltage changing linearly with light …

This study probes the effect of annealing temperature on electrical, optical and
microstructural properties of indium tin oxide (ITO) films deposited onto soda lime glass …

Aluminum-doped zinc oxide films were deposited at 100° C on polyethylene terephthalate
by radio-frequency magnetron sputtering. The sputtering parameters such as RF power and …

We report, for the first time, results on transparent ZnO: Al thin films deposited on polyester
(Mylar type D, 100μm thickness) substrates at room temperature by magnetron sputtering …

In this paper we present an improved version of large area (5 mm× 80 mm) flexible position
sensitive detectors deposited on polyimide (Kapton® VN) substrates with 75 μm thickness …

Flexible and large area (5 mm/spl times/80 mm with an active length of 70 mm) position-
sensitive detectors (PSDs) deposited onto polymeric substrates (polyimide-Kapton VN) have …

Purpose–This paper aims to present a prototype of a capacitive angular-position sensor
which exploits advantages of flexible/printed electronics. The novelty of the sensor is that the …

The aim of this paper is to present data concerning the performances of position sensitive
detectors based on silicon carbide alloys, able to detect the green colour and to compare …

Among popular transparent conducting oxide (TCO) materials, indium tin oxide (ITO) and
aluminum-doped zinc oxide (AZO) are expected to be the most applicable for the TCO layer …

以聚酰亚胺膜作为柔性衬底材料, 用等离子体增强化学气相沉积(PECVD) 技术制备氢化非晶硅
薄膜. 喇曼(Raman) 光谱分析表明适当温度下的退火工艺使氢化非晶硅薄膜具有均匀的微硅 …