The waterborne polyurethane (PU) prepolymer was prepared based on isophorone
diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and …

Andesite‐(AW) and marble‐dust wastes (MW) were recycled to be used in composite
preparation. Both were obtained from local industrial sources. Commercially available epoxy …

In order to improve the mechanical performance and water resistance of water-borne
conducting polyaniline film, conducting polyaniline/polyurethane–silica hybrid film was …

The waterborne polyurethane–acrylate (PUA) was prepared based on isophorone
diisocyanate, polyether polyol, dimethylol propionic acid, hydroxyethyl methyl acrylate, butyl …

A new conducting copolymer, polyacrylonitrile‐graft‐polyaniline (PAN‐g‐PANi), has been
prepared by chemical and electrochemical methods from a precursor polymer. Poly …

The nylon 6 (PA6)/polyurethane (PU) debris produced during the sanding process would
result in a serious resource waste and environmental hazard if disposed of inappropriately …

The DGEBA/Phn blends were formulated by a sequential mixing process. The thermal
conductivity (k) of the blends has been measured as a function of temperature over the …

A new solvent-free thermal assisted electrospinning (e-spinning) process for the preparation
of polyurethane (PU) microfibers has been developed. Based on the synthetic process of …

The interconnection of polyaniline (Pani) chains through polyurethane (PU) blocks of the
same length but with different spacing has originated a series of new semi conducting …

Modern engineering science and nanotechnology have hastened the development of high
performance corrosion‐resistant coatings having a broad spectrum of effectivity under a …