Deep learning-based tensile strength prediction in fused deposition modeling
As one of the transformative technologies, Additive Manufacturing (AM) has been facing the
challenge of product property inconsistency, which prevents its adoption in various critical …
challenge of product property inconsistency, which prevents its adoption in various critical …
[HTML][HTML] Compressive response versus power consumption of acrylonitrile butadiene styrene in material extrusion additive manufacturing: the impact of seven critical …
Acrylonitrile butadiene styrene (ABS) is a multipurpose thermoplastic and the second most
popular material in material extrusion (MEX) additive manufacturing (AM). It is widely used in …
popular material in material extrusion (MEX) additive manufacturing (AM). It is widely used in …
Effect of infill pattern and infill density at varying part orientation on tensile properties of fused deposition modeling-printed poly-lactic acid part
HK Dave, NH Patadiya, AR Prajapati… - Proceedings of the …, 2021 - journals.sagepub.com
Fused deposition modeling is an additive manufacturing process in which successive layers
of material are deposited to create a three-dimensional object. It is the most widely used …
of material are deposited to create a three-dimensional object. It is the most widely used …
Interlayer bonding has bulk-material strength in extrusion additive manufacturing: New understanding of anisotropy
This study demonstrates that the interface between layers in 3D-printed polylactide has
strength of the bulk filament. Specially designed 3D-printed tensile specimens were …
strength of the bulk filament. Specially designed 3D-printed tensile specimens were …
The impact of defects on tensile properties of 3D printed parts manufactured by fused filament fabrication
K Fayazbakhsh, M Movahedi, J Kalman - Materials Today Communications, 2019 - Elsevier
Abstract Fused Filament Fabrication (FFF) is a popular 3D printing process that has gained
interest from industry in a wide range of applications. This research work studies directional …
interest from industry in a wide range of applications. This research work studies directional …
[HTML][HTML] A survey of the influence of process parameters on mechanical properties of fused deposition modeling parts
G Gao, F Xu, J Xu, G Tang, Z Liu - Micromachines, 2022 - mdpi.com
Due to the availability of materials and low cost for production, fused deposition modeling is
becoming the most widely used additive manufacturing (AM) technology. However, the …
becoming the most widely used additive manufacturing (AM) technology. However, the …
[HTML][HTML] Influence of print orientation on surface roughness in fused deposition modeling (FDM) processes
I Buj-Corral, A Domínguez-Fernández, R Durán-Llucià - Materials, 2019 - mdpi.com
In the present paper, we address the influence of print orientation angle on surface
roughness obtained in lateral walls in fused deposition modelling (FDM) processes. A …
roughness obtained in lateral walls in fused deposition modelling (FDM) processes. A …
Towards standardizing the preparation of test specimens made with material extrusion: Review of current techniques for tensile testing
C Phillips, M Kortschot, F Azhari - Additive Manufacturing, 2022 - Elsevier
Researchers and industries rely heavily on standardized testing methods to ensure products
are designed and manufactured with high quality. With increasing use of additive …
are designed and manufactured with high quality. With increasing use of additive …
Experimental characterization and finite element validation of orthotropic 3D-printed polymeric parts
R Torre, S Brischetto - International Journal of Mechanical Sciences, 2022 - Elsevier
Abstract Components fabricated via Fused Filament Fabrication (FFF) have an anisotropic
response, which is further complicated by an intra-part and a part-to-part variation of their …
response, which is further complicated by an intra-part and a part-to-part variation of their …
Mechanical characterization and experimental modal analysis of 3D Printed ABS, PC and PC-ABS materials
S Kannan, M Ramamoorthy - Materials Research Express, 2020 - iopscience.iop.org
Additive manufacturing (AM) process builds the parts, layer by layer precisely from
Computer-Aided Design (CAD) models, whereas traditional subtractive manufacturing …
Computer-Aided Design (CAD) models, whereas traditional subtractive manufacturing …